SERVICE PHONE
+86-371-65621391
PRODUCT
CENTER
SERVICE PHONE
+86 371 65621391

Product knowledge

Application of 5052 aluminum plate for fuel tank manufacutu

addtiame:2017/06/12 click:

The fuel tank is a special container for storing hydraulic or hydraulic fluids in hydraulic systems. The fuel tank can be divided into open tank and closed tank. The fuel tank must have a large enough volume; the suction and return lines should be inserted below the minimum level to prevent air and oil from splashing bubbles; the distance between the suction and return lines should be as far as possible Set the partition; in order to keep the oil clean, the tank should be sealed around the cover, the cover is equipped with air filter; tank bottom should be above the ground l50mm above; on the tank surface corrosion treatment should be given full attention.



Migntai Al is specialized in the research of fuel tanker for a long time; its product 5052 aluminum is the most widely used in aluminum plates.
is the most widely used in a rust-proof , the strength of this alloy is high, especially with anti-fatigue strength: plasticity and high corrosion resistance, cannot heat treatment to strengthen, in the semi-cold hardening plasticity is still good, cold hardening when the plastic low, good corrosion resistance, good weldability, cutting performance can be polished.
Our company produced 5052  aluminum alloy of good quality, stable performance, with a mature '1 +1' hot-rolled production line, we will be based on the actual needs of customers, to provide customers with different status of 5052 aluminum. Welcome to inquire: 0371-86628262.