SERVICE PHONE
+86-371-65621391
PRODUCT
CENTER
SERVICE PHONE
+86 371 65621391

Product knowledge

5083 aluminium plate Introduction:

addtiame:2016/09/12 click:

5083 aluminium plate Introduction:

5083 aluminium plate  belong to Al - Mg - Si alloy, using a wide range, especially construction cannot leave the alloy, is the most promising alloy. Good corrosion resistance, good weldability, cold workability is good, and with moderate intensity. 5083 aluminium plate main alloy elements for magnesium, has good forming performance, corrosion resistance, weldability and medium strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.

AL - Mn alloy, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment to strengthen, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished. Purpose is mainly used for high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing small load parts: wire used for rivet.

5083 aluminium plate Scope of application:



5083 aluminum plate is often used in materials for ships, ships, vehicles, cars and aircraft plate weldments pressure vessel, which is to be strict fire prevention, cooling device, television tower, drilling equipment, transportation equipment, missile component and armor.

5083 aluminium plate Chemical composition:



Al: aluminum allowance

Si Si: 0.4 or less

Copper Cu: 0.1 or less

Magnesium Mg: 4.0-4.9

Zinc and zinc: 0.25

Manganese Mn: 0.40-1.0

Ti Ti: 0.15 or less

Chromium Cr: 0.05-0.25

Iron Fe: 0.4

A: 0.05

Total: 0.15

5083 aluminium plate Mechanical properties:



Tensile strength of sigma b (MPa) : 110-136

Elongation delta (%) : 10 or 20

Annealing temperature: 415 ℃.

Yield strength sigma s (MPa) 110 or more

The sample blank dimensions All wall thickness



Elongation delta 5 (%) of 12 or more


Aluminium plate 5083 is widely used in marine construction. Generally speaking, customers use Aluminium plate 5083 in temper H111,H112,H116,H321. The alloy 5083 are generally having also very good formability and stronger than the medium strength alloy 3xxx series. alloy 5083 have good formability, combined with the medium strength and excellent corrosion and the high quality anodising ability and weldability, many customer use this alloy in many applications for outdoor exposure. Alloys5083 contain from about 0.8 wt% Mg to more than 5 wt% in the most highly alloyed variants. Mingtai Aluminum Industry Co., Ltd., as one of the biggest Chinese mill in china also value such important alloy and explore many product abroad. Mingtai Aluminum Industry Co., Ltd. Can supply width between 30mm to 2600mm, thickness between 0.15-600mm.

Introduction of Aluminium plate 5083

 

2. Aluminium plate 5083 with DNV certificate

Nowadays, many mill can produce Aluminium plate 5083,based on such kind of product have wide usages.But there are fewer mill can supply Aluminium plate 5083 with DNV certificate. Because there is strict demands on the DNV .In order to promote Aluminium plate 5083 abroad, Mingtai Aluminum Industry Co., Ltd try its best to improve the product quality and apply the DNV step by step. Finally during the Sep of 2015, Henan Mingtai Aluminum Industry Co., Ltd. Is approved manufacturer of wrought aluminium and aluminium alloys in accordance with det Norske Veritas’ Rules for Classification Pt.2. Manufacturer approved by this certificate is accepted to deliver according to DNV GL,NNV and GL rules.

3. Future Development of Aluminium plate 5083 with DNV certificate

The obtained DNV certificate indicate that Henan haomei aluminum production of Aluminium plate 5083 have met the standad of DNV .

To sum up, We will supply good quality and service to the customers. haomei Aluminium plate 5083 with DNV certificate will have prospect future.


pot specification:

 

5083 plate spot size: 0.3 mm - 350 mm (thickness)

5083 bar spot size: 3.0 mm - 500 mm (diameter)

5083 wire spot specification: 0.1 mm to 20 mm diameter (line)

5083 aluminum plate belongs to the aluminum magnesium alloy At present in domestic is dosage of aluminum alloy