SERVICE PHONE
+86-371-65621391
PRODUCT
CENTER
SERVICE PHONE
+86 371 65621391

Product knowledge

1100 aluminum plate profile

addtiame:2016/10/21 click:
1100 aluminum plate profile
1100 aluminum plate for industrial pure aluminum, aluminum content is 99.00% (mass fraction), strengthening heat treatment. Has high corrosion resistance, electrical conductivity and thermal conductivity, its small density, good plasticity, through pressure processing can produce all kinds of aluminum, but low intensity. Other process performance basic is the same as 1050 a. 1100 is often used to require a good forming performance, high corrosion resistance, and does not require high strength, such as video and chemical handling and storage equipment, sheet metal working products, use drawing spinning processing of hollow metal, welding, key combination
Range of application
1100 aluminum plate with general application in implements, radiator, bottle caps, printing plate, building materials, heat exchanger components, can also be used as a deep stamping products. Widely used in every field from cooker to industrial equipment.
Chemical composition
Aluminum Al: 99.00 Si Si: copper Cu 0.45:0.05 ~ 0.20 Mg Mg: zinc, zinc: 0.01
Manganese Mn: Ti Ti: 0.035 - V V: iron Fe 0.05:0.35
Note: a single: 0.05.
Mechanical properties of
Tensile strength of sigma b (MPa) : 110 ~ 136.
Elongation delta (%) : 3 ~ 5.
The technical standards
Aluminum plate with the national standard (GB/T 3880-2006), is applicable to the unity of the aluminum alloy plate material standards.
 
1100 aluminum plate belt belongs to the pure aluminum plate series, its strength is relatively low, it has excellent ductility, formability, weldability and corrosion resistance; Can further improve the corrosion resistance after anodic oxidation, obtain and beautiful surface at the same time; But there is no strengthening heat treatment.
Pure aluminum plate series according to the last two digits to determine the range of low aluminium content, such as series 1100, the last two digits for 00, according to the international brand naming principles, aluminum content must be more than 99.00% of qualified products. China's aluminium alloy technology standard (GB/T3880-2006) also make clear a regulation in 1100 reached 99.0% aluminum content.