+86 371 65621391

Product knowledge

1050 aluminum alloy for aluminum coil and aluminum sheet

addtiame:2016/11/07 click:
1050 aluminum Description

Overview (1) the intensity of pure aluminium is low, but with excellent formability, surface process, welding quality,
corrosion resistance.1050 aluminum belt also belong to the a pure aluminum plate series products, and 1060 series
of products nearly, the chemical composition and mechanical properties of phase applications now 1060 aluminum
 belt replacement.Series 1050, the last two digits for 50, according to the international brand naming principles,
aluminum content must be more than 99.5% of qualified products.China's aluminium alloy technology standard
 (GB/T3880-2006) also make clear a regulation in 1050 reached 99.5% aluminum content.Because do not contain
 other technical elements, so the production process is single, the price is relatively cheap, is currently the most
commonly used in conventional industry a series.
(2) industrial pure aluminum has high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity
 characteristics of, but strength is low, not through strengthening heat treatment, cutting the sex is bad, can accept contact
welding, gas welding.Using its advantages to make more specific performance of the structure, such as aluminium foil gasket
and capacitor, electronic cars, electric wire, cable protection cover, net, wire core and the ventilation system of aircraft parts
and decoration.


Often used in daily necessities, lighting appliance, baffle plate, decoration, chemical industry, container, radiator, signs,
electronics, lamps and lanterns,nameplate, electric equipment, stamping parts and other products.In some requirements
 with the occasion of the formability are high resistance to corrosion, but the strength requirement is not high, the chemical
 equipment is its typical application. Industrial pure aluminum has general characteristics of the aluminum, small density,
 conductivity, good thermal performance, good corrosion resistance, plastic processing performance is good, can be processed
 into boards, belt, foil and extrusion products, such as welding, argon arc welding and spot welding can be performed.

Can't heat treatment to strengthen industrial pure aluminum, can improve strength by cold deformation, the only form of heat
 treatment are annealing, the recrystallization starting temperature and impurity content and degree of deformation, generally
 at about 200 ℃.Sheet annealing of sigma b = 80 ~ 100 mpa, sigma 0.2 = 30 ~ 50 mpa, zeta = 35% ~ 40%, HB = 25 ~ 30.Cold
 deformation by 60% ~ 60%, although can increase to 150 ~ 150 mpa, but zeta value decreased to 1% ~ 1.5%.Increase iron,
silicon impurity content can improve the strength, but lower plasticity, electrical conductivity and corrosion resistance.1200 (L5)
annealing softening characteristics of industrial pure aluminum plate and cold work hardening properties as shown.
Visible from the figure, to adjust the cold deformation after annealing temperature or control after annealing of cold deformation
 can obtain the mechanical properties of different state of cold work hardening.In order to improve the formability and take the
 former method as well.

Physical properties

Chemical composition
Aluminum Al, 99.50;
Si: 0.25;
Cu: 0.05;
Mg: 0.05;
Zn: 0.05;
Mn: 0.05;
Ti: 0.03;
V: 0.05;
Fe: 0.40;
A: 0.03.

Mechanical properties

Tensile strength of sigma b (MPa) : 60-100

Elongation delta/(%) : 23 or higher

Elongation 50 mm/(%) : 25 or more

Note: pipe longitudinal mechanical properties at room temperature

Sample size: all the wall thickness

1050 aluminum coil

Heat treatment specification:

1) full annealing: heating to 390 ~ 430 ℃;On different material effective thickness, heat preservation time of 30 ~ 120 min.
At 30 ~ 50 ℃ / h speed with furnace cooling to 300 ℃, the air cold again.

2) rapid annealing: heating to 350 ~ 350 ℃.On different material effective thickness, heat preservation time of 30 ~ 120 min.
Air or water.

3) quenching and aging: 500 ~ 510 ℃, quenching air cooling;Artificial aging 95 ~ 105 ℃, 3 h, air cooling;Natural aging
120 h at room temperature.

The relevant standard

Aluminum plate with the national standard (GB/T 3880-2006), is applicable to the unity of the aluminum alloy plate material standards

The organization

Industrial pure aluminum can be seen as essentially iron, low silicon content of a iron, silicon aluminum alloy.In the impurity phase
 in addition to the acicular hard brittle FeAl3 and massive hard brittle silicon particle, can form two ternary phase, when Fe > Si,
formation of alpha (Fe2SiAl8);When Si > Fe, the formation of beta (FeSiAl5) phase.Two phase are brittle compounds, the latter is
 more big to the harm of plastic.Therefore,generally in the industrial pure aluminum made Fe > Si.When Fe > Si, also can to reduce
 the crystallization temperature range and reduce the casting crack.When Fe/Si 2 ~ 3 or more, can produce grain fine, has a good
 industrial pure aluminum sheet stamping performance.It should be pointed out that, in the industrial pure aluminium iron and silicon
 mostly exist in the form of ternary compound, there seldom chance FeAl3 and free of silicon.

Atom and crystal structure

Atom and crystal structure: atomic number: the combining power of the 13 elements: 3
Atomic weight: 26.98
Atomic radius: 0.143 nm
The lattice type: face-centered cubic lattice
The lattice constant: 0.404 nm
No with different crystal transformation
Physical properties: density: 20 degrees (solid) : 2.6996 g/cm3
700 degrees (liquid) : 2.371 g/cm3
Melting point: 99.996% AL: 660.24 degrees
AL: 99.6% 658.7 degrees
Melting latent heat: 388.116 J/g
Specific heat: normal temperature solid state: 0.946 J/(g, K)
Melting point of liquid: 1.289 J/g. K)
Thermal conductivity: 2.177 W/(cm.)
Linear expansion coefficient of: 23.6 x 10 (6)
Shrinkage rate: 6.6%
Electrode potential: 1.3 V
Electrical conductivity: 38.2 / ohm/meter
Mechanical properties, elastic modulus: 69000 ~ 71000 mpa
Tensile strength: 90 ~ 120 mpa
Yield strength: 20 ~ 90 mpa
Elongation: 11% ~ 25%
Brinell hardness: 24-32 hb
Impact toughness: 10 ~ 20 J/cm2

We can supply aluminum plastic composite panel,Color Coated aluminum coils ,PVDF Coated aluminum coils,
 Aluminum tread plate,aluminum circle,aluminum foil,aluminum sheet,aluminum plate,Household Foil, Air-container Foil, Cable Foil, Electronic Capacitor Foil, Medicine Foil,Blister Foil, Flexible Packaging Foil, Aluminum Sheet,
Aluminum Coil,CTP Stock, Litho Stock, Cap Stock,Aluminum Tread Plate, Embossed Coil, Mirror Panels,
Cans Cover Materials, Aerospace Aluminum, Mold Aluminum Materials, etc. At the same time,
we also accept OEM/ODM production according to requirements of customers.

Whenever you have a need for any of our products, please feel free to contact us .

    Office Add: 1103.No.14 Waihuan Road, New district, Zhengzhou, China
    Zip code: 450046