SERVICE PHONE
+86-371-65621391
PRODUCT
CENTER
SERVICE PHONE
+86 371 65621391

aluminium sheet

5754 Aluminum Sheet

5754 Aluminum Sheet FOB Reference Price:Get Latest Price
US $2,600 - 2,800 / Metric Ton | 5 Metric Ton/Metric Tons (Min. Order)
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Port: Any port in China
 
1. Introduction of 5754 Aluminum Sheet

5754 aluminum sheet is a typical alloy of Al-Mg. It contains Mg (2.6-3.6%), Si (0.4%), Cu (0.1%), Zn (0.2%), Mn (0.5%), CR (0.3%), Fe (0.4%), and Al (all the rest). 5754 aluminum sheet of haomei Aluminum has tempers, such as O, H111, H32, H34, etc. The thickness is from 1mm-3mm. The tensile strength of haomei aluminium. is 190-280Mpa and elongation, both of which live up to national standard (such as GB/T 3880-2006). Except 5754 aluminum sheet, haomei  can also provide other aluminum sheet, aluminum foil and aluminum coil.

5754 aluminium alloy sheet
5754 Aluminum Sheet Features

The main ingredient of this series aluminum sheet is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
With its low density, it features high tensile strength and elongation.
This series aluminum sheet is a commonly used and mature series in China.
5754 Aluminum Sheet Specifications
Sheets thickness: 0.15-2.0mm
Plate thickness: 2.0mm-250mm
Temper: Soft and Variety Hard temper (O-H116) (T2-T6)
Customer requirements are acceptable
5754 Aluminum Sheet Applications
With the same area of other series, the weight of this aluminum sheet is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
It is widely used in conventional industries.
This aluminum sheet can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

5754 Aluminum Sheet
Excellent corrosion resistance and, unlike the other magnesium alloys, it maintains that rating when functioning in the150-300 degrees F range where the others would be prone to stress corrosion. Not a decorative alloy but well adapted to the applied finishing processes. High strength, excellent weldability, fair formability, and poor machinability. Non-heat treatable. Typical applications include dump bodies, exhaust stacks, marine components, and chemical handling vessels.

2. Heat Treatment Technology of 5754 Aluminum Sheet

Different heat treatment of 5754 aluminum sheet are used in different parts, the followings are the common ways of heat treatment.

1) Homogenizing Annealing: heat temperature to 440℃,stay hot for 12-14hours, then cold in the air.

2) Fast Annealing: heat temperature to 350℃-410℃, stay hot for 30-120minutes, then cold in the air or in the water.

3) High Temperature Annealing: heat temperature to 250℃-300℃, stay hot for 2-10minutes or cold in the air for 1-30minutes.

4) Low Temperature Annealing: heat temperature to 250℃-300℃ or 150℃-180℃, stay hot for 1-2hours, then cold in the air.

3. Surface Features of 5754 Aluminum Sheet

1) No crack, correction pit, or nitric acid trace.

2) Bubbles and defeat are allowed less than 8% of sheet depth. However, the max defeat depth cannot over 0.5mm, the defeat area cannot over 5% of the total area.

3) Allow supplier polish along vertical direction to make surface smooth.

4) Other requirement: made by buyer or supplier.

4. Applications of 5754 Aluminum Sheet

5754 aluminum sheet has middle strength, good anti-corrections, weldability and it is easy to mold. For it features above, 5754 aluminum sheet can be vastly used in automotive manufacturing, including car door, mould, sealing element, etc. What’s more, 5754 aluminum sheet can also be used as weld structure, pressure vessels, transport tank, marine structures, etc. All of these applications have high demands of weldability, strength of anti-fatigue, as well as other features.  haomei aluminum. has 18years experience in manufacturing and supplying 5754 aluminum sheet, so high quality and fast delivery can be guaranteed. Besides, haomei aluminium  can also manufacture other aluminum sheet, foil and coil from 1000 series to 8000series.

Our Aluminium sheets products list including
Coil sheet, Mill finish aluminium sheet (MFP)
Color coated aluminium sheet
Checkered plate (TLP in nickname of , checker plate, Tread plate, diamond plate, chequer plate)
Mirror finish aluminium sheet (Mirror reflective aluminium sheet)
Anodised aluminium sheet (two side anodised, only silver color available.)
Stucco aluminium sheet (orange skin type, variations stucco type)
CTP base board
PS base board
CC Lids/cap plate
number:79addtime:2016/09/14 vote: